Home Blog  

21 Nov 2014


An open source 3D Printable Raman Spectrometer using a RaspberryPi and easy to find off the shelf components..

An open source 3D Printable Raman Spectrometer that uses a raspberryPi, a couple of arduino compatible ARM boards, a really bright laser and some parts you can grab from eBay, adafruit, sparkFun, Mouser, or wherever…!

ramanPi – Raman Spectrometer – [Link]

23 May 2014

Keep losing things? Want to share & track belongings with friends? Locate bags/keys in an instant?

The FIND is the best track & find tag which can be used to reliably prevent losing or misplacing belongings like keys, bags, pets, laptops, phones etc.

FIND V2.0 – Never lose anything! Share or track via App – [Link]

21 May 2014


OK, this isn’t very innovative, but it’s still a fun weekend project. The setup starts with a transfer pipette, with a tiny hole made on top so that any water inside will slowly drip. This is followed by a jury-rigged optointerrupter: a fairly standard IR diode, a matched phototransistor, two 5 mm nylon spacers, top half of a polypropylene beaker, and copious amounts of hot-melt glue. The diode is connected to +5V through a 220 Ω resistor; the phototransistor uses a 10 kΩ one, in the usual topology. That’s good enough to detect the light that gets refracted by a passing drop of water.

Catching Drops of Water  – [Link]

15 Apr 2014

2013-11-19 14.23.08

Slickstreamer writes:

When we, PinMeTo, moved in to our office at MINC in the beginning of September we only had three keys to four persons and an extra key cost 500 sek so i built an automatic door lock for the door. Maybe cheaper to just buy an extra key but not as fun.

Electric imp automatic door lock – [Link]

4 Feb 2014


Bajdi did some tests for switch mode voltage regulators:

There are different types of DC-DC regulators. The most common are linear and switch mode regulators. Everyone that has tinkered with electronics has probably used a 78xx series linear regulator. They are easy to use since they don’t need any special components. With most linear regulators you just put a capacitor on the input and one on the output and they will work.


Testing switch mode voltage regulators – [Link]

3 Dec 2013


New 2mm safety system Hirschmann for measuring and testing will serve even in tight spaces, on densily populated PCBs and similar. 

It´s not that far, what we introduced to you a wide portfolio of a measuring and testing equipment from SKS-Hirschmann in the article SKS – measuring and testing with pleasure. It can be said, that almost everyone, who´ll try testing probes or clamps from SKS, will quickly favor them and they differ from many „no-name“ products by a precise, sufficiently rigid construction.This time, the company SKS comes with a novelty in a form of a 2mm safety system, which despite small dimensions meets specification for CATIII – 1000V. As this system for 2mm banana plugs is significantly smaller than 4mm system, it enables a comfortable and effective measurement even in tight conditions, at smaller components, …

Naturally, this system can be convenient not only because of 1000V max. voltage but also thanks to smaller dimensions of banana plugs and a whole set of accessories. That´s why we´ll appreciate it at measurement in all applications where there´s “no space left”.

New safety system we keep as items upon order, but probably we´ll soon incorporate it to standard stock items.

In case of interest in any SKS-Hirschmann product, please contact us at info@soselectronic.com

Even a miniature testing clamp can handle 1000V – [Link]

21 Nov 2013


Frank Zhao posted his STM32F4 breakout board [via]:

I really like the STM32 family of ARM microcontrollers. This breakout board is a narrow design that fits perfectly on a breadboard. Every pin is accessible. It has USB, a reset button, and a bootload button. The chip itself has a permanent USB bootloader that is activated by the bootload button. This means that no equipment is required to program this microcontroller, no expensive debugger, nothing at all except a USB cable.
Design files are open source and can be downloaded, there is also a short video about the bootloader and more instructions

I am also giving away blank PCBs to those interested (see “giveaway” on my page), Seeed makes more than I need, every single time

STM32F4Stamp, a breakout board for STM32F4 – [Link]

30 Jul 2013


pcmofo @ instructables.com writes:

I wanted to make an easy and secure way to enter my garage. RFID was the best way to unlock my door, even with my hands full I can unlock the door and push it open! I built a simple circuit with a basic ATMega 168 arduino chip and a ID-20 RFID reader to control an electronic door lock.

Arduino RFID Door Lock – [Link]

19 Jul 2013


Bajdi built an Arduino MP3 alarm clock and wrote a detailed explanation on his blog describing the build:

The idea is simple, an LCD that shows the date and time. A couple of buttons to set an alarm, and an MP3 module and small speaker to play an MP3 when the alarm goes of.


Arduino MP3 alarm clock – [Link]

18 Jul 2013


Suzanne Deffree writes:

Apple this week is celebrating the five year anniversary of its Apps Store. If you go to the store, you’ll notice Apple is giving away five games and five apps to celebrate the anniversary.

When it opened its virtual doors, the Apps Store did so with a mere 500 apps. Now, it showcases more than 900,000, with more than 800 apps being downloaded each second.

In total more than 50 billion downloads have taken place since the Apple App Store’s 2008 launch, with more than $10 billion being paid out to developers.

Mixed in among the whopping number of available apps are a few that engineers, specifically, might enjoy. We’ve created the following list of our own favorites as well as some contributed by engineers in the field.

20 Apple apps for engineers – [Link]





Search Site | Advertising | Contact Us
Elektrotekno.com | Free Schematics Search Engine | Electronic Kits