EDATEC Unveils Two New Fanless Cases for Raspberry Pi 5
Raspberry PiTop Stories

EDATEC Unveils Two New Fanless Cases for Raspberry Pi 5

With great power comes great responsibility, and in the world of computing, greater power often leads to significant heat generation. This seems to be the case with the new Raspberry Pi 5, so much so that they had to introduce an active cooler to cool the Pi. Active coolers are well...

Continue Reading
1.152
Views
0 Comments
EDATEC ED-IPC3020 is A Fanless RPi 5 PC with M.2 SSD and RS485/RS232 Interfaces
Raspberry Pi

EDATEC ED-IPC3020 is A Fanless RPi 5 PC with M.2 SSD and RS485/RS232 Interfaces

The EDATEC ED-IPC3020 is a fanless PC based on the Raspberry Pi 5. It stands out because it supports NVMe M.2 SSD and features RS232 and RS485 serial ports. It also offers the standard I/O capabilities of the Raspberry Pi 5. The new Raspberry Pi 5 SBC has a PCIe 2.0x1 interface that...

Continue Reading
1.174
Views
1 Comments
Introducing HyperAIBox’s Compact PCs: Powered by Rockchip 3568 and Rockchip 3588 Processors
AISBC

Introducing HyperAIBox’s Compact PCs: Powered by Rockchip 3568 and Rockchip 3588 Processors

IBM is introducing new tools to make it easier for developers to write code for quantum computers. Qiskit Patterns is a set of tools that helps developers map classical problems, optimize them for quantum circuits, and execute them using Qiskit Runtime. With Qiskit Patterns and Quantum...

Continue Reading
1.118
Views
0 Comments
STMicroelectronics unveils the VL53L8CX ToF Sensor
Sensor

STMicroelectronics unveils the VL53L8CX ToF Sensor

STMicroelectronics recently unveiled the VL53L8CX, a new Multi-Zone Time-of-Flight (ToF) distance sensor, that has a daylight range of 285cm, a significant improvement over the 170cm range of its predecessor, the VL53L5CX. In 2021, STMicro first introduced its first multi-zone ToF...

Continue Reading
1.138
Views
0 Comments
This PD Trigger Board Features a Potentiometer – Adjust Output Voltage
Power supplyUSB

This PD Trigger Board Features a Potentiometer – Adjust Output Voltage

Engineer and designer Vincent "CentyVin" has designed a simplified USB-C PD (Power Delivery) based PPS (Programmable Power Supply) trigger board, that allows users to easily set different output voltages by simply using a potentiometer. CentyVin in his Hackday Post Explains that this...

Continue Reading
1.106
Views
0 Comments
Topton M4 Fanless Mini PC Features an Intel N100 Processor at a $106 Price Point
SBC

Topton M4 Fanless Mini PC Features an Intel N100 Processor at a $106 Price Point

The Topton M4 is another fanless mini PC powered by an Intel N100 Alder Lake-N quad-core/quad-thread processor. It supports up to 32GB of DDR4-3200 RAM and includes M.2 and SATA III SSD sockets. Priced at $106, this is the most affordable Mini PC on the market. The Topton M4, priced...

Continue Reading
1.205
Views
0 Comments
Melexis squeezes ultimate performance in a tiny 3D Magnetometer
Sensor

Melexis squeezes ultimate performance in a tiny 3D Magnetometer

Melexis announces the MLX90394 Triaxis® micropower magnetometer, a tiny Hall-effect based sensor. It perfectly balances the design trade-off between low noise, current consumption and cost. With on-the-fly selectable modes and advanced configurability, it enables high reuse and fast...

Continue Reading
1.088
Views
0 Comments
Load switch ICs extend battery life
IC

Load switch ICs extend battery life

Littelfuse has expanded its protection IC product line to include five load switch ICs that deliver power savings in a small package. Littelfuse, Inc. has announced the release of five load switch ICs in its protection IC product line. Featuring a small form factor and high...

Continue Reading
1.067
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives