Online prototyping with A/D simulation, in Infineon Designer
Software

Online prototyping with A/D simulation, in Infineon Designer

Infineon Technologies' Infineon Designer, introduced at the 2016 electronica trade fair, is presented as the first online prototyping engine combining analogue and digital simulation functionalities in an internet application. By Graham Prophet@ edn.com: Requiring a web browser only,...

Continue Reading
8.052
Views
0 Comments
LTM4643 – Ultrathin Quad μModule Regulator with Configurable 3A Output Array
IC

LTM4643 – Ultrathin Quad μModule Regulator with Configurable 3A Output Array

Configurable as quad, triple, dual or single output, the LTM4643 quad output step-down µModule [micromodule] (power module) regulator deliver, respectively, 12A, 6A & 6A or 9A & 3A, or 4 x 3A from a 9 x 15 x 1.82 mm ultrathin LGA package. by Graham Prophet @ edn.com: This...

Continue Reading
4.855
Views
0 Comments
DIY Arduino ProMini Data Logger
Arduino

DIY Arduino ProMini Data Logger

Ed Mallon has details on his DIY ProMini data logger: Typical pro-mini loggers built with this design sleep at 0.25mA, before extra sensors are added. At that current draw, the logger should deliver approximately six months of operation on three brand new AA batteries with a 15min...

Continue Reading
6.708
Views
0 Comments
PWM Fan controller
ArduinoControl

PWM Fan controller

Lucky Resistor has build a PWM fan controller using Arduino and DHT22 sesnsors. The fan controller described on this project page, controls one or more PWM controlled 12V PC fans. It uses the input from two precise DHT22 based temperature sensors. The MCU is an Arduino Uno, which is...

Continue Reading
7.781
Views
0 Comments
How to Choose a Connector
Basic Electronics

How to Choose a Connector

Sanket Gupta @ octopart.com discuss on how to choose a connector. He writes: Continuing our series about choosing parts, inspired by the latest version of the Common Parts Library, let’s take a close look at how to find and select connectors. In this blog, we will explain all the...

Continue Reading
4.279
Views
0 Comments
Pressure sensors need as little as 0.9 V
Sensor

Pressure sensors need as little as 0.9 V

Susan Nordyk@ edn.com: These micropower low-pressure sensors operate from a supply voltage of just 0.9 V to 1.8 V and are intended for use with noncorrosive, nonionic working fluids in such applications as medical devices and instrumentation, environmental controls, HVAC equipment,...

Continue Reading
3.780
Views
0 Comments
Using OV7670 Camera Sensor With Arduino
ArduinoSensor

Using OV7670 Camera Sensor With Arduino

Developing a hardware project became much easier thanks to the growing number of the various sensors and actuators modules, which give you the ability to shift your ideas into a wider range of applications. This tutorial presents the steps of how to use OV7670 Camera Sensor Module STM32...

Continue Reading
48.561
Views
4 Comments
Recover Bricked ATtiny Using Arduino as high voltage programmer
ArduinoMcu

Recover Bricked ATtiny Using Arduino as high voltage programmer

Hi! Today I'll explain you how to recover your bricked ATtiny microcontroller using your Arduino board. ATtinys are very popular due to their small form factor yet very powerful. While working with them you may accidentally brick the ATtiny. As arduino is extremely popular and really...

Continue Reading
44.575
Views
58 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives