Build Your Own Cheap Antenna Analyser
ArduinoMcu

Build Your Own Cheap Antenna Analyser

Ham radio is the use of radio frequency spectrum for purposes of non-commercial exchange of messages, wireless experimentation, self-training, etc. Developing a ham radio project may requires using an antenna analyser, a device that is used for measuring input frequency and...

Continue Reading
31.674
Views
1 Comments
Tau : The Tiny 32-bit Arduino Zero Compatible!
ArduinoMcu

Tau : The Tiny 32-bit Arduino Zero Compatible!

"Tau" is a new board in the world of embedded systems, designed by Rabid Prototypes.  It is powered by a 32-bit ARM core, but Tau's main strength is full compatibility with the well-known Arduino Zero,  yet in a very tiny package. What is the Tau? The Tau is an extremely...

Continue Reading
6.108
Views
0 Comments
ADXL354 – MEMS ICs detect structural defects
Sensor

ADXL354 – MEMS ICs detect structural defects

Three-axis MEMS accelerometers, Analog Devices’ ADXL354 and ADXL355 perform high-resolution vibration measurement to enable the early detection of structural defects via wireless sensor networks. The low power consumption of the devices lengthens battery life and reduces the time...

Continue Reading
5.457
Views
0 Comments
€15 IoT Geiger Counter using ESP8266
IoTSensor

€15 IoT Geiger Counter using ESP8266

Geiger counters are devices used to detect radioactive emissions, most commonly beta particles and gamma rays. The counter consists of a tube filled with an inert gas that becomes conductive of electricity when it is impacted by a high-energy particle. The Geiger–Müller tube or G–M...

Continue Reading
15.112
Views
0 Comments
TE0722 Zynq DIPFORTy1 “Soft Propeller” Module
IoTMcu

TE0722 Zynq DIPFORTy1 “Soft Propeller” Module

The DIPFORTy1 is a powerful Xilinx based FPGA board with small form factor and many programmable I/Os. It is popular for its high performance at most competitive price. Introduction: The TE0722 is based on the Xilinx Zynq-7000, a System on Chip. It contains a FPGA and a Dual Core...

Continue Reading
6.801
Views
0 Comments
Turn your Zero Pi into a USB Dongle
HardwareProductsRaspberry PiUSB

Turn your Zero Pi into a USB Dongle

The $5 Raspberry Pi Zero is a standalone computer that can be embedded in various applications, but maybe now it is time to add some extra features. It comes with a USB OTG port, meaning it can function as a USB device rather than a USB host. Thus, it can become a serial device with...

Continue Reading
7.243
Views
0 Comments
Water Tank Overflow Alarm System Using ESP8266
HardwareIoT

Water Tank Overflow Alarm System Using ESP8266

Sometimes the float valve of a water tank may not work properly causing water to overflow and spread across the floor. Peter Jennings faced this problem in his storage area, and he had developed an alarm device to notify him when the water exceeds its normal range. Peter’s project...

Continue Reading
10.961
Views
0 Comments
Online prototyping with A/D simulation, in Infineon Designer
Software

Online prototyping with A/D simulation, in Infineon Designer

Infineon Technologies' Infineon Designer, introduced at the 2016 electronica trade fair, is presented as the first online prototyping engine combining analogue and digital simulation functionalities in an internet application. By Graham Prophet@ edn.com: Requiring a web browser only,...

Continue Reading
8.055
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives