Home Blog  

6 Jul 2015


Rui @ ruijc.webnode.com writes:

The fact of having a CNC available at home gave me the freedom to build stuff more easily and quickly than before. Without this machine parts would take some time to manufacture and most likely would not end so perfect. This caused new ideas to be easily implemented.

This was one of those ideas that was born only by the desire to build a small replica of a gaming machine without any electronica inside. However,i would not pass up the opportunity to invent and build something to install inside.
I wanted to have something different and unique for that cabinet and not have a mini game machine. I chose to create a small and simple weather station to show not only temperature and humidity values but also hours and if possible something else …
Weather Station – [Link]
29 Jun 2015


by sameer:

We always try to know the physical and electrical data like temperature, pressure, current, ac voltage etc. In this project, I’m going to display these data in the real time as well as I’ill record it to a memory card(SD/microSD/MMC card). Here the project can display four different things; ac voltage, environment temperature, relative humidity and the real time in 12 hrs format.

SD Card Data Recorder – [Link]

24 May 2015


by Nathan Chantrell:

This is a small dev board I designed to make experimenting with and deploying the ESP8266 ESP-03 modules a bit easier. As well as breaking out all the pins to 2.54mm headers it has a position to fit either a DS18B20 temperature sensor or a DHT22 temperature/humidity sensor plus the required pull up resistor. It can be powered from 3.3V or 5V+* if the regulator is fitted and there is a footprint for a micro USB connector if required.

ESP8266 ESP-03 Dev Board – [Link]

23 May 2015


by indigod0g @ instructables.com:

In this project, we will be making a mini weather station that measures temperature and humidity and transmits them wirelessly to a ground station, which displays the readings on an LCD display!

It’s a fairly easy project and can be used either on its own or part of something bigger.

Mini weather station – [Link]

19 May 2015


±2% accuracy in a whole range of relative humidity measurement – that´s just one of several improvements brought by the third generation of miniature calibrated sensors from company Sensirion.

Even the actual series like SHT1x and SHT2x belong to a top in this segment. Forthcoming series SHT3x (SHT30, SHT31 and soon also SHT35) addresses mainly those of you, requiring maximum accuracy even in limit values (humidity below 10% and above 90%), miniature dimensions and ultra low power consumption. So a main difference of a new SHT31 compared to SHT21 is, that a typical +-2% is maintained in a whole range. Together with a precise temperature measurement in element we still have a possibility to simply compute a dew point, what´s one of the key parameters for ventilation control (HVAC, heat recovery). If it´s “only” necessary to guide a humidity not to exceed certain level, then you´ll probably also use the output „Alert“ pin, able to start interrupt in a host MCU for instance or directly control further devices. Output of the SHT3x sensor is the linearized value, which can be easily transformed to a final value (%RH, °C).SHT31 is available in 2 versions – SHT31-DIS-B with a digital output via well-proven I2C bus (2 selectable addresses) and also in a version SHT31-ARP-B with a linearized analogue (proportional) output. That´s why SHT31-ARP-B is an interesting alternative for direct processing in analogue circuits, as it contains 2 independent outputs with output voltage of 10-90% Vdd, responding to 0-100%RH and -45 to +130°C temperature. Digital output version also features wide possibilities of setting regarding measurement frequency, communication speed and other parameters.

Detailed information will provide you SHT3x-ARP and SHT3x-DIS datasheets. Comparison of particular series will provide you the „Sensirion_Humidity” flyer.

Even the humidity & temperature sensors can be “3G” – [Link]

20 Mar 2015


With Sensirion humidity and temperature sensors you can be sure of what you measure. Moreover, now we´ll support your development by free samples.

Top-class calibrated humidity and temperature sensors Sensirion already gained many fans. Mainly thanks to a fact, that they´re not only “sensors” but a ready-made solution with a pre-amplifier, ADC and other circuits, which directly provide a final value in a digital form. That´s why it´s not necessary to solve input portion (noise, shielding, power supply, length of wires,…). Moreover, their long-term stability is verified in a praxis.

Features and usage of Sensirion sensors was introduced to you in many our articles. In the Sensirion portfolio can be found easily solderable types on a small PCB like for example SHT11(15) or SHT71 (75), as well as miniature types in SMT DFN packages like for example SHT21 (25) and also the new SHTC1. Small DFN package is practically impossible to solder manually, but it´s relatively easily manageable by means of a solder paste and a hot-air soldering station or ideally by a reflow in a hot-air oven.

Maybe, you´ve already noticed, that in many articles we also bring you a contest with a possibility to win free samples of a given component. We usually draw by lots 1-10 winners, which will directly receive free samples.

Still, if you´re seriously interested to try a given sample for a development of your (industrial) application, please contact us by e-mail. In many cases, we can provide you a given sample even if you wasn´t one of lucky winners of the contest.

Evaluate the Swiss precision for free! – [Link]

18 Mar 2015


Martin’s DIY Internet connected smart humidifier project:

The project uses a DHT22 temperature sensor mounted to the side of the enclosure for better ventilation and reliable reading:
I threw in a ultra-cheap I2C OLED status display to get a visual reading. Milling the box so that the OLED shows was pretty nasty, hated it. I cut a piece of paper and placed it on top of the cover, below the transparent lid to cover up for the lousy milling job
The humidistat switches on and off the humidifier as needed, the humidifier itself is plugged in to a plug in the relay. The  auto detects when water is out and stops, so I didn’t have to care about that.

Internet connected smart humidifier – [Link]

2 Mar 2015


At the 2015 Mobile World Congress in Barcelona, Spain, the leading sensor manufacturer Sensirion will present a new multi-pixel gas sensor, plus a new barometric pressure sensor. Both new sensors, which rank among the smallest yet most accurate in their class worldwide, are capable of measuring indoor air quality (IAQ), the gases in a person’s breath, and barometric air pressure, as required for indoor navigation applications. The new sensors complement Sensirion’s existing product offering for wearables, smartphones, tablets, and the Internet of Things (IoT), and confirm the company’s status as the only sensor manufacturer to offer a complete solution all the way from sensor to cloud. With its trusted humidity and temperature sensors already established on the market, Sensirion is now expanding its range of environmental sensors to include gas and pressure sensors.

Sensirion presents the smallest and most accurate Gas and Pressure Sensors – [Link]

25 Feb 2015


by Francesco Truzzi :

Some time ago I came across a new chip from TI, the HDC1000. It’s a temperature and humidity sensor with I2C interface and requires little to no additional components. It comes in an 8BGA package: we can all agree it’s pretty small.
Some of the peculiar characteristics of this chip are that it has a DRDYn pin which goes low any time there is a new reading from the chip (so you can precisely time your requests) and that the sensor is located on the bottom of the IC, so that it’s not exposed to dust and other agents that may false the readings. Also, it has an integrated heater that can remove humidity from the sensor.

So I developed a very small breakout board for this chip as well as an Arduino library (yay, my first one! raspberryPi and nodemcu might come next).


HDC1000 temperature and humidity sensor breakout, with Arduino library! – [Link]

27 Jan 2015


The HDC1008 is a digital humidity sensor with integrated temperature sensor that provides excellent measurement accuracy at very low power. The device measures humidity based on a novel capacitive sensor. The humidity and temperature sensors are factory calibrated. The innovative WLCSP (Wafer Level Chip Scale Package) simplifies board design with the use of an ultra-compact package. The sensing element of the HDC1008 is placed on the bottom part of the device, which makes the HDC1008 more robust against dirt, dust, and other environmental contaminants. The HDC1008 is functional within the full –40°C to +125°C

HDC1008 – Integrated Low Power Digital Humidity Sensor with Integrated Temperature Sensor – [Link]





Search Site | Advertising | Contact Us
Elektrotekno.com | Free Schematics Search Engine | Electronic Kits