Home Blog  






31 Oct 2014

5W_Stereo_Pic

5W Stereo Audio Amplifier project based on BA5406 IC which is suitable for application like stereo radio cassette player, stereo components systems etc.

The Heart of the project, BA5406 is a dual OTL monolithic power IC with two built-in, high output speaker amplifier circuits. High output of 5W×2 can be produced when VCC=12 V and RL=3Ω, and 2.8 W×2 when VCC=9V and RL=3Ω. The BA5406, which uses a high allowable power dissipation package, has a simple heat-sink design.

5W Stereo Audio Amplifier – [Link]

4 Aug 2014

1024x1024-2356637

by epweb.angelfire.com:

Most of the work that I have done in the past with vacuum tube and solid state electronics has been repair. So, I have ventured into the realm building. This is actually my second build (I’m still getting the bugs out of the first attempt) but I have applied all that I learned from mistakes to this build. Building from scratch is nothing like repairing. It takes time, a lot of thought and reasoning go into a build no matter how simple it may look.

6v6 Stereo Amplifier – [Link]

21 Jul 2014

Gobo-LM1875-Stereo-Amplifier-Kit

by Giovanni Militano @ diyaudioprojects.com:

I’ve always enjoyed electronic kits of all kind and like many of you will credit them for the foray into DIY audio. Over time as my DIY skills matured I found myself taking the DIY route for projects far more often than relying on kits. While I will always enjoy electronic kits, I generally won’t try one out unless there is something really unique about the kit. When I saw the Gobo Stereo Audio Amplifier kit from boxedkitamps.com, I was immediately intrigued by the unique looking enclosures available with the amplifier kits. Shown in Photograph 1 below is the completed Gobo Stereo Audio Amplifier kit with a translucent blue acrylic enclosure. The choice of enclosure finishes for the Gobo stereo amplifier kit include blue, dark grey and orange acrylic and bamboo.

Gobo Stereo Audio Amplifier Kit (LM1875, 15W, Class-AB) – [Link]

3 Feb 2012

electronics-diy.com writes:

With this Stereo FM Transmitter with BA1404 you will be able to create a mini stereo FM station and broadcast to your entire home, a simple way to have an audio link wireless with ease. With the FM transmitter BA1404 Hifi Stereo you can stream your music from your iPod MP3, satellite receiver, computer, DVD player, Mobile Phone, MP4 player and MP3 and other audio source directly to an FM receiver with crystal clear sound.

Stereo FM transmitter – [Link]


26 Oct 2011

enide.net writes:

I built my first power amplifier when I was still in secondary school. The circuit was made of transistors, didn’t provide much power and had an ugly PCB.

Around the same time I got access to a datasheet of TDA1524, a tone/volume control circuit, and I decided to use it to build a pre-amplifier, to improve the quality of the sound coming out of the amplifer. Both circuits worked well for almost a decade but the old amplifier was never up to my expectations.
In 2006 I decided that it was time to build a real power amplifier, this time based on an integrated circuit to reduce the number of external components and cost.

Stereo Audio Amplifier with a TDA2616 – [Link]

20 Mar 2011

tonieletronica.50webs.com writes:

Circuit of stereo FM transmitter of of high quality using integrated circuit ba1404 for mp3, mp4, ipod, computer, radio of the car. Transmit of your equipment of portable audio for the radio of your car, transmitters of fm of low potency are the ideal for transmission wireless of audio sign for fm receivers. Mainly in that case that is treated of transmitter of FM stereo with ba1404. The heart of that circuit is the circuit integrated ba1404, that is a mini fm transmitter, that already counts with the necessary internal circuits for transmission in fm. just being necessary to increase some components discman or any other audio source turning the wireless. If you already set up other transmitters of transistorized fm it will see that when setting up that with having integrated BA1404, that the quality of the sound and the frequency stability is excellent. Besides the but it presents easy assembly.

Stereo FM Transmitter with BA1404 – [Link]

20 Mar 2011

shine7.com writes:

This amplifier is based on the PA100 parallel amplifier detailed in National Semiconductor’s application note – AN1192.

Since my DIY speaker is 4-ohm and somewhat difficult to drive, I want to have a more powerful amplifier to match with it. Therefore I designed this amplifier which uses two LM3886 per channel, in parallel circuit. This amp can deliver about 50W into a 8-ohm speaker and 100W into a 4-ohm speaker. This is a stereo amplifier and therefore 4 LM3886s are used.

100W LM3886 Parallel Stereo Power Amplifier – [Link]

27 Feb 2011

jendaelektro.ic.cz writes:

400W Stereo Audio Amplifier based on the original Marshall Leach involvement, but has made some improvements. Regarding the power supply voltage to the +-75V. VC comparing the performance of the modified Leach 700W/2R on one common board of both channels, as well as protection and control circuits for the fans. Compared to the 700W version a bit different in wiring. Because some things in the 700W version is completely tightened to perfection.

400W Stereo Marshall Leach Amplifier – [Link]

10 Feb 2011

This stereo encoder is a halfway between analogue and digital processing. It combines the best from both domains to provide high-quality and easy to build device. The sampling frequency used in this stereo encoder is 97 times higher than the pilot tone frequency. This makes very easy to reject all spectral residues around the sampling frequency without affecting the main signal characteristics.

FM Broadcasting Stereo Encoder – [Link]

2 Jul 2009

mainamp

Ever wanted to build a highly dangerous, inefficient, yet awesomely retro piece of electronics? Well, I have. That’s pretty much what a tube amp is. Vacuum tubes are old electronic components that act like transistors, controlling a lot of current with a little current. You usually hear about tubes being used in guitar amplifiers, because they distort in a way that suits guitar playing. However, tubes can also be used to amplify a stereo signal from another audio source such as a CD or MP3 player. Tube amps, unfortunately, aren’t the most practical things in the world; they consume a great deal of power, get very hot, and are big. That being said, they look damn cool, and some people seem to think they sound pretty nice too.  Kit is also available.

Building A Stereo Tube Amp – [Link]



 
 
 

 

 

 

Search Site | Advertising | Contact Us
Elektrotekno.com | Free Schematics Search Engine | Electronic Kits